Search Gear
 

Learn Power App | Cakewalk SONAR X1

May 1, 2011
share

OBJECTIVE
Re-create the sound of vintage phaser stomp boxes using equalization

BACKGROUND
Phase shifters create peaks and notches in the frequency response; sweeping these notches produces the characteristic phaser sound. It''s possible to emulate these effects through parametric equalization, grouping, and automation.

TIPS

  • If you''re using the ProChannel for track equalization, the Sonitus:fx Equalizer can create the same effects.
  • In Step 1: Experiment with three or four notches, and with different Qs.
  • In Step 1: To emulate the sound of phase shifters with strong positive feedback, create narrow peaks (preferably three or four) instead of notches.
  • In Step 5: For periodic modulation, use Sonar''s Draw tool to draw triangle, sine, saw, etc. automation envelopes.

STEP 1
Enable the ProChannel EQ''s two middle bands, then set the Q to around 8.0 and Level to minimum.















STEP 2
Set the Freq controls so they''re about two octaves apart (e.g., 500Hz and 2kHz).














STEP 3
Right-click on each Freq control and assign it to a group (e.g., group X). When grouped, moving one control causes other grouped controls to track each other.











STEP 4
Right-click on each Freq control and select Automation Write Enable.















STEP 5
Start playback. Move the Frequency controls for the desired phaser “motion,” and Sonar will write automation data to the track.

Show Comments

These are my comments.

Reader Poll

Do you use music streaming services?


See results without voting »