FROM RECORDING TIPS TO GEAR REVIEWS, HERE'S WHAT you
need to know about using musical instruments that
exist only in the virtual world.
WTF happened?!? Instruments, particularly keyboards,
used to be things that you set up in
your studio and played into a
recorder. But now, they’re in your
recorder—and instead of arriving in a
wood, metal, or plastic enclosure, they
come on a CD- or DVD-ROM, or are
downloaded from the Internet. Really,
these are instruments?
Really, they are. There are over a
thousand virtual instruments available,
ranging from questionable to insanely
great. We already did a roundup on
virtual drummers in the 07/07 issue,
but now it’s time to lay our fingers on
some synths and samplers.
Of course, lines of code and a cool
user interface do not an instrument
make. One of the most important addons
is a control surface to give physical
control over an instrument,
whether a dedicated box like Native
Instruments’ Kore, or a more general
purpose “fader box” controller. Either
of these help restore the physical element
to virtual instruments.
The computer comes into play,
too. Today’s fast computers reduce
latency, and make the playing experience
far more enjoyable; also, companion
editing applications reveal an
instrument’s innards in a way that’s
hard to pull off in the physical world.
Truly, the virtual instrument has
come of age.
This roundup has two main sections.
The first covers tips and techniques on
recording virtual instruments, because
the process is not always as obvious as
it might seem. The second features
reviews of several current virtual instruments,
and frankly, this presented a
problem: There are so many of them we
couldn’t cover even 1% of what’s out
there. So, we chose a selection that’s
fairly representative of what you’ll find—
from clever analog synth emulations, to
super-synths with huge sound libraries.
There’s a third part, too, but this
one threw us a curve: We wanted to
get some insights from prominent
virtual instrument designers on the
state of the art, so we asked Ernst
Nathorst-Böös (Propellerhead Software),
Doug Rogers (EastWest),
Peter Gorges (Advanced Instrument
Research, a division of Digidesign),
and to add a non-designer viewpoint,
Nick Batzdorf (Editor of Virtual
Instruments magazine) to give us
their thoughts. We expected to get a
few useful quotes we could use in
sidebars, but to our surprise and
delight, we instead received long,
detailed, and introspective responses
from all of them. There was more
than we could fit in the magazine,
and editing them seemed just plain
wrong. So, we’ve put the complete,
unedited versions of these interviews
on the web at www.eqmag.com . It’s
rare to get these kind of insights from
people who are, in various ways,
responsible for the virtual revolution
we’re experiencing in music.
It was a blast putting this roundup
together, and we sincerely hope you
enjoy it. Play on!
PART 1:RECORDING VIRTUAL INSTRUMENTS
Well, it’s easy, isn’t it? You just insert it
into your host and click on record. Right?
Wrong, because a virtual instrument
should be an instrument, not
just another feature in your DAW. It
should feel right, and offer expressive
SHAKING THE CURSE OF LATENCY
Most people understand what “latency”
is with virtual instruments: the time it
takes between hitting a note and hearing
it. The greater the latency, the less
satisfying the playing experience.
Aside from the obvious solution—a
wicked fast computer, and well-written
audio drivers for your audio interface—
there’s another approach I call “variable
latency recording.” The premise is
that latency is a continuum between
low and high latency, and the trick is to
find the “sweet spot” along that continuum
for the task at hand. For example,
when recording, you want the lowest
latency for the best feel, but when
mixing, you can use higher latencies to
accommodate all the CPU-sucking
tracks, instruments, and effects.
When recording a virtual instrument,
you need to unload your CPU of
as many obligations as possible so it
can devote all its power to the instrument.
Here are some easy ways to deal
with latency issues.
• Record keyboard parts early in the
recording process, when there are
few other virtual instruments or
effects. You’ll be able to get away
with low latency.
• For “guide” tracks, use audio tracks
(recorded instruments or loops), as
they require less CPU power than
• Record with any “low-resolution”
options enabled (Figure 1). These
days, fewer instruments have low-res
modes because computers have gotten
so fast—but those that do often
allow for lower latency when recording
in low-res mode.
• Don’t use CPU-hungry effects, like
convolution reverb. Add these during
mixdown, when it’s possible to
increase latency to 20ms or even
more and not have the delay be a
• A “workstation” (or multitimbral
sampler) plug-in loaded with instruments
will use less CPU than an
equivalent number of individual
• The Freeze function is your friend.
Most modern DAWs can freeze a
track, which renders the instrument
audio to a temporary (or permanent,
if you want) hard disk audio
track, then “disconnects” the virtual
instrument itself from the CPU to
save power. This is an excellent
option when you’re partway
through recording; you can freeze
your virtual instruments, yet still
set a fairly low latency when
• Don’t have other programs running,
even in the background, when
recording. They all demand at least a
little bit of RAM, CPU power, or both.
• Consider the new generation of
hardware synths that think they’re
software. The Korg M3, Yamaha
Motif XS, Roland Fantom G, and
several others have software GUIs
that run as plug-ins in your computer
(Figure 2), and communicate
with the hardware via USB. For all
practical purposes, the synth is a
plug-in—except with a bitchin’ control
surface, and on the downside,
you can’t instantiate more than one
instance. But as these are multitimbral
anyway, this isn’t much of a
limitation. These synths typically
include onboard mixing and effects,
which takes even more of a load off
the CPU. One of the more interesting
examples of this approach is
Cakewalk’s Sonar V-Studio, whic
builds a hardware Roland Fantom
synth into the audio interface
(Figure 3). Thus, you have a multitimbral
hardware synth available at
all times during the recording
process that doesn’t require any
significant amount of CPU.
There are other hardware solutions,
too. The Use Audio Plugiator (see the
associated review on page 52) basically
houses several synths in DSP, and communicates
with its GUI via USB; the
venerable SCOPE system (formerly
from Creamware and now from Sonic
Core) has several DSP-based instruments
as part of their “virtualized studio”
system, and TC Electronic’s
PowerCore has a synthesizer option.
With so many instruments these days
having huge sound libraries, there’s the
question of where to store all that
data—not a trivial issue, when you consider
that having only Spectrasonics’
Omnisphere and MOTU’s Electric Keys
requires over 80GB. (And yes, they
both take a long time to install—but six
double-layer DVDs is way better than
27,000+ floppy disks!)
Most installations default to
installing the sounds on your root
drive, usually as some sub-folder of the
program folder. Not only does this
“crowd” the all-important OS drive, but
streaming samples from disk is a diskintensive
Therefore, it’s a good plan to have a
separate, huge drive dedicated solely
to instrument libraries. I installed a
1TeraByte SATA drive inside my computer,
but another option is to use a
fast external FireWire or USB 2.0 drive.
In general FireWire provides somewhat
greater sustained throughput than USB
2.0, but has a reputation of being more
“finicky” in terms of getting along with
particular chip sets.
If you place the sounds somewhere
other than installation default, you’ll
probably have to tell the program
where to look for its
library. There may be the
option of searching for
files, but if you have a big
hard drive, that can take a
while—it’s faster to point
to the sounds manually.
handle this in different
ways. The most common is
to specify a file path, typically
in a Preferences menu
(Figure 4). Another
method is to create aliases
where the sounds are
assumed to be, then
point to where the
sounds really are (Figure 5). However,
the shortcut must have the exact
name—you can’t leave “shortcut to” or
“alias” in the name.
Although you can always add controller
data after recording, it’s more
spontaneous to do it while playing.
Many keyboard controllers include
some sort of control surface, as do
hardware synthesizers (Figure 6).
Lacking that, generally you can use a
fader box or other MIDI control surface
designed for mix control, like the
Novation Nocturne, Mackie Control,
Native Instruments Kore (or their
Maschine controller for MPC padbased
BCF2000, and the like.
The control surface generates MIDI
data. If there’s a keyboard, you’ll have
velocity, mod wheel, and probably aftertouch
as modulation sources. There may
be other options, like an expression
pedal input, or front panel controls.
As to actually linking physical controls
to virtual instrument parameters,
the most common option is to simply
right-click or ctrl-click on a parameter
to bring up a “learn” menu: Move your
hardware control, and the instrument
will link that control’s movement to the
selected parameter (Figure 7). You will
likely select one or more of the following
options for optimizing the response.
• Polarity or Invert. When positive,
increasing the control’s value increases
the parameter’s value. When negative,
increasing the control’s value decreases
the parameter’s value. As a practical
example, suppose you want to
increase “Drive” (i.e., add some distortion
to make the sound dirtier)
with a mod wheel—except that this
creates a volume jump. By applying
negative polarity to the volume over a
limited range, you can turn down the
level simultaneously while increasing
• Range, Depth, or Level. This
determines how much modulation will
be sent to a parameter, thus determining
the range of the parameter the
hardware control will sweep. You might
want the control to cover a parameter’s
full range, or only a small portion
(e.g., filter resonance from 5% to 30%).
Often polarity and range are combined
in a single control (Figure 8), where the
center position indicates no modulation,
turning clockwise gives positive
modulation, and turning counterclockwise
gives negative modulation.
• Smoothing. Because incoming
MIDI data is usually quantized into
128 steps, this may produce an
annoying “stair-stepping” effect
instead of the smooth, continuous
control you’d expect
from an analog synthesizer.
internally, within the synthesizer, to
smooth the response. The only drawback
is that this might add a bit of an
attack time, and a slight “overhang”
during the decay.
• Response curve. The parameter
may respond in a linear, log, or exponential
Even if you don’t have a physical
controller, all is not lost: With many
instruments and hosts, you can enable
automation and write automation data
by turning a virtual instrument’s control
with a mouse. Of course you’re limited
to controlling only one parameter
at a time this way, but it’s better than
nothing, and you can always overdub
With so many virtual instruments, it
was very tough choosing just these
few—but we feel each one represents
a particular genre of instrument.
Most have downloadable demos or
at least online audio demos, so with
few exceptions, you can “try before
you buy.” As with our other
roundups, all products are presented
in the order our layout artist thought
looked best on the page, and all
prices are list prices.
Electric Keys is a sample playback-based
VST/AU/RTAS/DXi/standalone encyclopedia of 50 vintage
keyboards—combo organs, electric pianos, clavs,
organs, piano bass, string synthesizers, “tape
samplers”—with more presets than I feel like counting. It
uses the UVI audio engine featured in other MOTU
instruments, with an efficient browser and several
sound modification options.
Included sample library: 39.1GB
Copy protection: iLok.
The interface: A basic “shell” has controls for Volume,
Tune, Bass, Middle, Treble, Drive, Tremolo (with off/on/pan
switch, Depth, Speed, and Sync), and four velocity curves.
Loading a different instrument changes the skin to reflect
the look of that particular instrument.
You can load up to two sounds simultaneously, each
with its own volume, pan, and mute control; an
additional “edit” panel for each instrument provides
significant editing, including 14 filter options with envelope,
amplitude envelope, and pan modulation. Also
useful: The “effects rack,” with an amp simulator (that
goes beyond just amp sims), filter, phaser, flanger, chorus,
“vinyl,” delay, and reverb. There’s also a standalone
Strengths: It really does have just about everything you
could want from a set of vintage keyboards, including sampling
with fine fidelity. Although the editability isn’t spectacular,
neither was the editability of the keyboards being
emulated. The best part here is the filter—14 different filter
types—although the effects can also add a very useful
dimension, and even be saved as presets that are independent
Limitations: There’s limited velocity multisampling on
several of the keyboards; for example, electric pianos with
five different velocity samples per note. Also, for authenticity
keyboard ranges are limited to that of the original keyboard—
but I would prefer if the ranges were stretched a bit
further. Sometimes playing an instrument out of its natural
range gives cool timbres.
The bottom line: If you lack vintage keyboard sounds,
Electric Keys will plug those holes—it reminds me conceptually
of Big Fish Audio’s Drums Overkill!, which sampled
every drum machine created since the Bronze age. Even if
you have most of the sounds represented here in other sample
libraries, there are enough variations that you’ll surely
find ones you don’t have. Overall, the completeness and relatively
low cost are in Electric Keys’ favor.
Combining both hardware and software, Maschine is a package
that streamlines the beat creation/groove process. It follows
the usual drum machine paradigm (you string patterns into
songs), but also borrows Ableton Live’s “scene” concept for
triggering multiple patterns simultaneously. It’s also a sampler
and re-sampler that can slice files.
Included sample library: 4.75GB
Copy protection: Online registration.
The interface: The hardware is a classy, compact playing
surface with 16 extremely predictable pads, 41 buttons, 11
rotary encoders, and two LCDs; while optimized for Maschine,
you can also switch it into a MIDI controller mode.
The software includes two applications. Maschine Editor
manages sounds, patterns, and scenes—assign sounds to
pads, apply effects to individual sounds or groups, sample,
create rhythm patterns, and combine patterns into scenes.
Controller Editor allows programming the controller’s pad
and button MIDI assignments when used as a MIDI
controller. Most functions are duplicated in hardware and
software, so you can adjust a parameter either physically or
virtually; the manual often describes how to do a function
using either option.
Strengths: Maschine is much deeper than it appears,
although you can get a lot out of just the top layer, and the
sample library is packed—fortunately, the browser has categories
and tags. The software/hardware integration is as
good as it gets, and the effects are huge: While there are
the expected effects (EQ, compressor), most seem
designed specifically for percussion (e.g., lo-fi, unusual
reverbs, frequency shifter, etc.). You won’t find them in your
typical host program, so it’s good Maschine has them. You
can automate most of their parameters.
Limitations: This isn’t a limitation of Maschine, but what
would be acceptable latency with other instruments can
become unbearable with percussion. It won’t matter if
you’re into step sequencing, but for realtime playing, a fast
computer is essential. Also, Maschine won’t do MIDI out so
you can’t send the patterns to anything else, nor can the
notes that trigger slices be brought into a host; according to
NI, these features will be in a future update. There’s also no
REX file support.
The bottom line: No single element of Maschine is particularly
innovative, but put all the pieces together, and you
have a groove/beat machine that is truly fun to use. If beats
are what you do, this machine was designed with you—and
tactile, realtime control—in mind.
Playa is sort of a hip-hop construction kit plug-in (that also
works in standalone mode) with a boatload of samples, MIDI
compatibility, and an MPC-style pad interface—which, incidentally,
works very nicely with Maschine’s controller. Editing
is limited, but Playa is quick, fast, doesn’t draw much
CPU, and has a high “fun factor.”
Included sample library: 5.5GB
Copy protection: Online authorization via virtual PACE.
The interface: Playa’s graphics are all about being a
DJ/groove-style instrument, so instead of having little teeny controllers
with illegible type, you get obvious faders and knobs that
look more like a DJ mixer. Almost all of these respond to MIDI
control and/or automation, so with a decent control surface, you
have more of a “live performance instrument” than a plug-in.
In addition to being able to load particular instrument
sounds (drums, guitar, bass, keys, choirs, synths, orchestral,
and more—all the usual suspects), you can also load particular
pad layouts. Note that Playa isn’t multitimbral, so it’s one
sound/one output pair per instance. But you can load up on
the instances—Playa doesn’t need a lot of CPU juice.
Strengths: Solid, mostly genre-specific samples form a
solid foundation. Playa is very easy to learn, once you figure
out a few basics (like how to choose keyboard or pad input,
and the difference between instruments and layouts). And,
the automation/MIDI control allows for expressiveness.
Limitations: The only effects are chorus and delay, so figure
on adding plug-ins afterward on the host. Also, Playa doesn’t
really work that well for standalone operation, because it loads
only one sound at a time—you can’t, for example, lay down different
tracks and overdub against a pattern. And of course, it’s
designed specifically for groove/hip-hop type sounds, although
I feel many sounds are highly suitable for dance music.
The bottom line: Playa costs less than the average virtual
instrument, with the tradeoff being less editing and complexity.
You still get a fine sample library, simple operation,
and that MPC-style vibe. Some consider it “Maschine lite,”
but they’re very different animals: Playa is about sounds, not
sequencing, slicing, or using a custom controller.
Plugiator comes with four virtual, DSP-driven synths in a
compact, tabletop hardware box. You can take it on the
road and use it live, or feed it into your DAW of choice.
Furthermore, its Plug-In Manager software editor takes
advantage of Plugiator’s USB interface for preset
management and the ability to tweak the instrument
parameters beyond the five parameters brought out to
realtime control knobs on the unit itself.
You can’t instantiate Plugiator as a plug-in within a
DAW yet (Use Audio is about to introduce VST front ends
for the various Plugiator instruments so that they can be
integrated with a DAW as plug-ins), but you can send MIDI
data from your DAW to Plugiator via USB, and feed Plugiator’s
audio outputs into your audio interface’s inputs.
Included sample library: There’s no library per se; Plugiator
ships with four modeled instruments (Minimax virtual
analog synth, LightWave wavetable synthesizer; B4000
Hammond B3 model, and Vocodizer vocoder). Other
instruments are available for $49 each: Prodyssey, Pro-
12, FMagia, and Drums’n’Bass (drum machine and
Copy protection: Online registration.
The interface: The hardware has 1/4" left and right outs, a
1/4" stereo headphone jack, balanced mic input for the
Vocodizer, and USB. However, you can’t plug in a USB MIDI
controller; you need to use the 5-pin DIN MIDI connectors,
or plug a USB keyboard into your computer, then send its
data via USB to the Plugiator. The Plug-In Manager application
is fairly standard, throwing all the various instrument
Strengths: It sounds fine, doesn’t load down your CPU,
and is platform-independent: If your DAW can spit out
MIDI, Plugiator knows what to do with it. The realtime
tweaking controls are a nice touch, and extra instruments
are inexpensive—for $698, you get eight instruments in a
small, portable package.
Limitations: Although you can load eight instruments in
DSP, you can only use one at a time. Also, each instrument is
limited to 100 patches. The sole effects are delay and chorus,
and different instruments provide different amounts of
polyphony (e.g., ten voices for the Minimax, 91 for the B4000).
Finally, you can’t run the Plug-In Manager while running a
DAW unless you use a MIDI loopback applet, like MIDI Yoke.
The bottom line: Plugiator takes an unusual approach to virtual
instruments, but it’s an effective one. There’s also a certain
feeling of permanence; if Apple or Microsoft updates
their OS you’ll still be able to use it, and it makes a reliable
live performance device.
It takes a lot to add something new to analog emulation
synths, but Future Audio Workshop seems determined to do
that with Circle. While the sound-shaping elements aren’t
out of the ordinary—oscillators with analog waveforms or
digital wavetables, various effects, filtering, and multiple
modulation sources (LFO, envelope, and step sequencer)—
the way they’re put together is clever. I also like the tuned
delay that feeds the output back to the input through a
“Feedback” section, which is sort of like an extra voice.
Included sample library: There are no samples, but the preset
management includes tagging/categorization and search.
FAW has posted additional free sound sets on their website.
Copy protection: Online authorization.
The interface: First of all, the interface looks modern
rather than emulating a vintage vibe—it reminds me a bit of
Live crossed with Tracktion—and features intelligent use of
color. For example, you can drag a colored circle from a
modulation source to a controllable parameter (e.g., filter
frequency), and the parameter’s “virtual jack” acquires the
same color. Each modulation source is color-coded, making
it easy to see what connects to what without using a modulation
matrix. There’s also a little ring around the “jack” for
adjusting modulation depth, like Arturia’s Moog Modular.
Strengths: Circle is exceptionally easy to figure out and
use. I looked at the manual only to check whether I’d missed
anything (I hadn’t), but I must say they did a really good job
on the documentation. If fact, if I ran an electronic music
school, I’d buy a site license and use Circle to teach synthesis.
Limitations: You can’t load your own wavetables, and all
the envelopes are basic ADSR types—okay if you’re going
for straight analog emulation, but they’re pretty old school
compared to things like tempo-synced envelopes. The LFOs
offer 16 different waveforms, which is appreciated—but
again, you can’t load your own—and the step sequencers
aren’t as complete as, say, Cakewalk Rapture.
The bottom line: If you like the idea of analog emulation but
don’t want something that’s just an imitation Minimoog, it’s
worth downloading the Circle demo to find out what the fuss is
about. It’s easy on both the eyes and ears.
STRING STUDIO VS-1
Do you like a DX7 Rhodes better than a real one? Do you wish
your guitar string had editable parameters? Do you think
Lounge Lizard really nailed the electric piano sound? Then
you’re a candidate for String Studio VS-1, a VST/AU/RTAS/DXi
plug-in (standalone too) that’s based on physical modeling of
strings rather than samples. Not only can you create recognizable
string sounds like guitar, bass, and clav, you can also
make sounds that exist only in your imagination, like stratsichords
or clavbasses. (By the way, if you’re a Live fan you’re
not having déjà vu: String Studio is very similar to Tension, an
optional Ableton instrument for Live 7.)
Included sample library: No samples, so there’s no sample
library—but you do get lots of presets. They’re useful in
their own right, and also provide a
great point of departure for your
Copy protection: Online challenge
The interface: It looks like something
out of Captain Nemo’s submarine,
but that’s a compliment—the
look is retro, but in a Moog sythesizer
sort of way. You can choose different
excitation types (pick, bow, and hammer),
damping, string parameters,
fret/finger interaction, and
soundboard bodies, and you also
have synth elements like filter, filter
envelope, LFP, EQ, and distortion.
Everything is brought out to
switches, controls, and drop-down
menus that respond to MIDI control
Strengths: Modeling-based synthesis
allows more expressive possibilities
than sample-based synthesis,
because samples can be altered only
so far without sounding freakish. And
unless you own the Scope system
Six-String plug-in, there won’t be
anything quite like this on your hard
drive—you’ll be exploring new sounds
every time you twist a knob.
Limitations: There’s not much to
dislike: String Studio is cost-effective,
original, delivers useful sounds, and
allows for lots of creativity. You can
complain that it’s a one-trick pony, but
it’s a really cool trick—and the product
lives up to the company’s promises.
The bottom line: If you’re looking for a
workstation-type of plug-in, this is
about as far from that as you’ll get.
However, if you have good line-up of
plug-ins and are itching for something
different, you’ll likely appreciate the
original, musically-useful approach
String Studio brings to the table.
Sure, you can just call up presets; but
this is an instrument that’s worth
tweaking to get the exact type of
sound you want.
This is based on the multitimbral
SampleTank engine, with 16 channels
and 16 stereo output pairs; you can
also save and load preset combis. In
addition to 17 instruments (Mellotron,
Chamberlin, Optigan, Novatron, Stylophone,
etc.), there’s a wealth of
effects—32 total—that add serious
value and sound-shaping ability.
You’ll find considerable editability,
from filtering to stretching; you can
apply these edits selectively to samples
in different keyboard zones.
Included sample library: 2.4GB of
Copy protection: Online authorization.
The interface: It’s basically SampleTank
with a different skin that has
the beat-up vibe of a vintage instrument.
The upper right half has a
browser; a multitimbral map to the
left can switch between channels 1–8
and 9–16. The lower half has multiple
pages for accessing and editing parameters,
with synth engine options
and effects parameters. A virtual keyboard
lets you play notes.
Strengths: SampleTron can emulate
vintage instruments exactly, including
quirks (the 8-second time limitation of
Mellotron “loops,” tape hiss, etc.) or
you can dial back the lo-fi and also do
infinite looping, like a modern sampler.
The effects are very useful, and overall,
SampleTron is far greater than the sum
of its parts. The correct judgment calls
have been made on how to bring these
instruments into today’s world, while
being respectful of their rightful place
in musical history.
Limitations: VST, AU, and RTAS
automation is limited to controlling
only six parameters—volume, pan,
and the four macro controls. This is
mitigated by being able to control
almost all parameters via MIDI controllers,
so if you have any kind of
MIDI control surface, you’ll be okay.
The bottom line: I’m not a huge fan of
those old tape samplers, because the
sound usually left so much to be
desired. Also, they stereotyped your
music—“Moody Blues strings,”
“Strawberry Fields flutes,” etc. But
while this package can do lo-fi if
desired, Sonic Reality has done the
audio equivalent of restoring an oil
painting: The dust and dirt is gone,
but the character remains, and you
see details you’ve seen before. In the
process, they’ve managed to make
these instruments relevant today—it’s
not just about nostalgia. That’s a
I’ve never used any samples of this
type of instrument in any of my
music before. Much to my surprise,
SampleTron will change that.
Spectrasonics has never stumbled,
while producing exceptional virtual
instruments. So perhaps it’s not surprising
that it would take Spectrasonics
to outdo Spectrasonics, and this flagship
instrument delivers on all levels.
Sure, Omnisphere deserves a long
and comprehensive review; I recommend
the one in the 12/08 issue of
Keyboard, because I basically agree
with everything it says. But there’s
one caution: If you’re expecting a
super-GM module with traditional
sounds, Omnisphere is not the
droid you’re looking for. While there
are some standard instruments,
Omnisphere is about pushing the
envelope, not copying it.
Included sample library: 42GB
and over 6,000 patches.
Copy protection: Online authorization.
The interface: There are four primary
pages for editing. Main handles
the crucial controls for the two
layers per patch you can load simultaneously,
Edit is for deep editing,
FX calls up 12 effects (four for each
layer, and four “common” effects),
and Arp is a 32-step arpeggiator.
That’s for individual patches. Go
into Multi mode, and Stylus RMX
fans will feel right at home: eight
channels for eight patches, each
with level, pan, and four aux sends
for feeding up to four effects per
aux, as well as four “master” effects.
But you’ll also find a “live” mode for
on-the-fly stack editing and playing,
and a Stack mode where you
can set up instrument crossfades,
velocity switching, splits, and the
like. All of this is obvious and straightforward—
no small feat with an
instrument on this level.
Strengths: While many other
synths just add features (and Omnisphere
has plenty of those), it’s the
sound library that makes Omnisphere
unique. Yes, there are some guitars,
strings, and synths, but if you get a
feeling of “been there, done that”
when playing with soft synths, you
won’t feel that way with Omnisphere.
Many sounds are sufficiently inspiring
you’ll be writing a song before you
know it. Omnisphere’s sample library
oozes creativity, and a browser can
help narrow your searches.
Limitations: There’s no standalone
mode, so live, you have to use a
host. You can’t load your own samples
(but the company isn’t ruling out
that possibility in a future release),
and there’s no demo version.
The bottom line: Reviewing this in
2,500 characters is like reviewing
Paris by saying “It has this really tall
tower left over from a world’s fair, lots
of museums, and great restaurants.”
Paradoxically, though, despite its
sophistication Omnisphere is easy to
summarize: It’s a tour de force of
sampling-meets-synthesis that’s surprisingly
easy to use, extremely
playable, cost-effective, and inspiring.
Price: $499 (upgrades available for
Spectrasonics Atmosphere users)
VIRTUAL INSTRUMENTS ROUNDUP: THE INTERVIEWS
When I wrote the virtual instruments roundup for EQ
magazine, I sent questions to four industry luminaries so I could have a few quotes to sprinkle around the roundup, sort of like tips. Little did I know that each would provide me with in-depth, insightful comments that really deserved an article of its own.
Rather than try to extract just “the good parts” of the article—an impossible task, given that there were only “good parts”—all the interviews are being published here in their entirety. The four participants are Doug Rogers, from EastWest; Ernst Nathorst-Boos of Propellerhead Software; Peter Gorges, formerly with AIR (although he was still with them at the time of this interview) and founder of Wizoo; and Nick Batzdorf, Editor/Publisher of Virtual Instruments magazine. I hope you enjoy their comments as much as I did.
DOUG ROGERS, EASTWESTCA: Why did you feel the need to develop your own instrument playback engine? Was it a question of technology, licensing, both, or…?DR:
Well, we got the idea to develop our PLAY software after the software licensing situation that we had with Native Instruments wasn’t working out. With Native Instruments we were using generic software that we couldn’t customize, and because we have many products that demand some form of customization to really make them work as we intended, that wasn’t a situation we could live with for long. So we made the very hard and expensive decision to start our own software division so we, not some other company, could control our future.CA: You were one of the first companies, if not the first, to partner with a virtual instrument company (Native Instruments) and wrap a playback engine around sound libraries. What caused you to move in this direction—fewer compatibility issues, more difficult to steal, more flexibility, or all of the above? What was the seminal moment when you thought, “I know! Let’s make our libraries into virtual instruments!”DR:
I think all of the above is applicable. Our Symphonic Orchestra was the first of our products to be bundled with a software sampler, and it was so popular we never considered going back to creating the multiple formats of the same sample library for hardware samplers. Thank goodness those days are over!
CA: You were also one of the first companies to take 64-bit operating systems seriously. What do you see as the main advantage of 64-bit operation? Clearly, the rate of adoption of 64-bit systems has been slow, with a few companies like Cakewalk being the exception. Do you think adoption will accelerate, or just build slowly over time?DR:
In the beginning, because the technology was in its infancy there were serious limitations. You were mainly dealing with importing raw samples into hardware samplers such as Akai, E-mu, Roland etc., and you couldn’t do that much with them due to a lack of memory. I remember our first piano collection that got a five-star review had two dynamics, and you needed two fully loaded Akai samplers to play them back! That all changed with the introduction of streaming data from personal computer hard drives; we were involved in the development of that technology. Now you can do a lot because of powerful personal computers and 64-bit technology, which as you say is in its infancy. We introduced 64-bit Virtual Instruments to the market two years ago. At that time only Cakewalk Sonar supported 64-bit. Now Steinberg/Yamaha Cubase supports 64-bit, and we always offered a 64-bit standalone version and 32-bit compatible version as well—that is necessary when you are pioneering new formats.
The advantages for the user will force the remaining companies to get with the program or lose market share, and we fully anticipate 32-bit applications will disappear over the next few years. 64-bit systems make 32-bit systems look like dinosaurs. While most high-end computers will support 16GB, a very small set of high-performance enterprise computers (with Microsoft Vista Ultimate) can already use 128GB of RAM. As hardware develops, the theoretical limit is 16 Exabytes, or 17 billion GB! However, with that kind of complexity also comes the difficulty of trying to make it all work on such a multitude of systems such as the thousands of combinations of computer hardware and software that users have. It’s just not reasonable to expect any software to work on all of these systems (some of them built by the users themselves), so we concentrate on making the software work on the most popular combinations and expand that over time to less popular systems.
To lower the risk for our customers, we have “fully functioning” trial versions of some of our products so they can see how well they perform on their computers prior to purchase. Fortunately after three years of development PLAY is mature, and performing well on most systems, and in 64-bit mode, outperforming the competition. The benefit of moving from these hardware units to computers is, our customers now have these huge detailed instruments with up to 16 dynamic layers, and many articulations controlled by keyswitches and other controllers, and can do things with them that we literally could never have dreamed of 15-20 years ago. With our built in scripting engine in PLAY (soon to be available to our users in our PLAY PRO programming editor), we literally can interpret their playing style. It’s heady stuff!CA: Your Fab Four library is impressive for many reasons. But I can’t help wonder how long it took to put it together, and whether you expected to make money off of it or whether it was more a labor of love? Could you describe the process of creating this library? Go into as much detail as you want!DR:
When I started the Fab Four project I didn’t really care if I made a profit off it or not because it was just something I wanted to do, and I figured that after putting 20 years of my life into this industry that I could do something for me for once. The interesting thing is that it actually broke even the day it was released, and it’s been a huge financial success to the point where I’m thinking of doing a follow up. Sometimes when you approach things without the profit motivation they end up being some of your most successful work. So initially it was just something I wanted to do for me, and I thought that there would be interest in it, but not as much as there was. It’s been a really successful product. Of course it also garnished the MIPA award—which is sort of like a Grammy in our industry because it’s voted on by over 100 international music magazines. So to win that means there was a consensus by others in the industry that we pulled off what we attempted to do. It started off as a hobby and ended up being great for our business. I think that’s how a lot of things develop. If you love what you do, then typically that can be passed on to other people for their enjoyment as well.
With regards to the Fab Four sounds, I am a Beatles nut, they were the initial influence for my fascination with sounds, however the Beatles obviously didn’t invent those instruments: Rickenbacker, Ludwig, Epiphone, Gretsch, Vox, etc.; commercial manufacturers made them. It was the sounds they and their engineers came up with that became iconic. It was really obvious to me that if I didn’t have exactly the same kind of equipment that they used, including all of the recording equipment, that there was no way I was going to be able to get that sound. And that’s what took a lot of the time in the pre-production stage of planning Fab Four. I probably put over a year of work into researching, finding, and procuring the equipment that we needed to do it.
The people I worked with on the project also had a strong connection with the Beatles. Ken Scott worked on five Beatles albums and was first engineer on two of them. The drummer and guitarist worked with Paul McCartney. So they were taught how to get the sounds and how to play them live. What is interesting is, the music that has been sent to me from users sounds nothing like the Beatles; our users are blending these classic sounds with other styles to give them flavor, and it works. The demos we created on the Fab Four product page were made in a Beatles style, so the product is very flexible for a lot of uses. CA: I believe you have your own private studio for sampling sounds. Aside from the economic advantage of not having to rent a facility, were there specific ways you outfitted your studio to optimize it for sampling?DR:
Well, it’s not private; it’s also available to outside clients as well as for our own use. One of things that we’ve done there that we find useful is to have all of our recording rooms and control rooms connected to each other, so if we are working in the large Studio 1 for example and find we just can’t get the right sound for a particular instrument, we can set that instrument up in one of the smaller rooms and we don’t have to move our recording setup to that studio. We also have a video hook up so we can see what’s going on in the other studio. In addition, I purchased a lot of very rare, great-sounding equipment that gives us an almost infinite palette of audio colors to work with. So, we can literally create any kind of sound that we want. CA: People still sample, and EQ readers are more likely to be among those who create their own sounds. Do you have any tips or advice you could give on how to record high-quality samples? For example, do you feel it makes a difference to record at 96kHz even if the end result will play back at 44.1kHz? Do you prefer to record dry, or with some ambience? Any insights would be appreciated.DR:
We record a lot of instruments in 88.2kHz, not 96kHz—because that way you can halve it if necessary. In digital, math comes into the equation. And it’s much easier in math to divide by two than it is to change 96k into 44.1k. 96k to 44.1k means that the computer is making a lot of decisions that we don’t want. Computers still have to compute 88.2k to 44.1k—but it’s much, much easier to halve the sampling rate. A lot of our current products are released 24-bit/44.1k simply because, if we released them 88.2k, they just wouldn’t play back on many people’s computers. We record them at the higher sample rate for the future. If computers double or triple in power over the next few years which we expect, we can release higher quality versions of what we have already, without having to re-record anything. So, typically, what we do, we record everything 88.2k, we edit everything 88.2k—then we bring it down to 44.1k for release. We very meticulously listen to the conversion to make sure there’s no major quality loss. But there is a subtle difference. For example, Fab Four was released 88.2k because the instruments weren’t as demanding as our orchestral instruments, and I think you can hear it… the transients on the drums are really crisp (love the drums in that collection). So, that’s one bit of advice I’d give.
The real work in making any kind of sampling product is really capturing it right in the first place. And particularly when you go and hire a concert hall and orchestra, things like that, it’s very expensive as well—sometimes hundreds of thousands of dollars. So you don’t want to set up a situation where you have to do it again just because new technology comes along and you want to take advantage of it. So we typically make sure that we have everything recorded for future developments in technology, as well as the products that we’re releasing now. For example, the orchestra that we recorded in a concert hall, we recorded 88.2kHz and 176.4kHz—because you just don’t know what’s coming. If we look back and see where we’ve come in the last 10 or 15 years and then project that forward 10 or 15 years, it’s quite conceivable that we can release something with that kind of sampling frequency—which will obviously give you the most superb quality possible. So, we have that. And we’re retaining that. But we just can’t use it right now because computers already have a hard enough time playing back samples with the big instruments as it is. And it gets to the point where you have to have a serious computer to play anything, and that would just limit our market too much. There are always compromises you have to make with technology, but we don’t make compromises in the recording process.
I also don’t like recording anything too dry. I don’t think instruments sound good when they’re put in too dry a space. You put an instrument in a near anechoic environment it just doesn’t sound like the instrument should, the sound most people identify with. We’re all about making things sound real. Some companies record instruments in a dry environment, and then you have to put artificial reverb on it to make it sound listenable. So now you’ve put two artificial processes on it, so how could it possibly sound real with all of that? We don’t believe in that. Most of our products have been recorded with controllable ambience. That’s what we did with the orchestra project—we had the ambience recorded separate so the composer could control the ambience to suit their composition. And I would argue that, in the case of an orchestra, that 50% of the sound that people identify with is the hall sound. Obviously that percentage changes depending on where you’re sitting in the concert hall. If you’re sitting in the front it might be a little less, if you’re sitting in the back it might be a little more. But it’s still a big part of the sound that the people identify with. And so to then take those players and those instruments to some dry environment and record them with a microphone stuck down the neck of the instrument just seems crazy to me—I never, ever got that.
CA: We all know that software theft has hurt the bottom line for music software companies. But do you think that software theft has also had a slowing effect on the advancement of technology? In other words, if this degree of theft didn’t exist, would our technology be further along than it is today?DR:
Piracy is just something that just really gets to me. We had to put up with it for the first 15 years that we had the company and there was nothing we could do about it. And only when we moved to the computer could we get a handle on it. Our use of the iLok system has proven to be very effective. I’ve yet to see any PLAY cracks out there. People have advertised them but we’ve followed through and found that it was just some shyster taking people’s money and giving nothing in return. A lot of companies suffer from their products being stolen by thieves.
I actually don’t like the word pirate; I think it sounds too romantic. They are common thieves, that’s the only description that is applicable. And I think that at the end of the day everyone suffers from it because there’s less money coming into the system that’s required to make even better products. It’s almost destroyed the record business. I would like to think that people that call themselves musicians or artists have a conscience. They tend to be the poets of our generation and I have a hard time figuring out how they can justify stealing someone else’s hard work in order to create their own. CA: What is the biggest limitation in virtual instruments that you hope to address in the future?
Mainly the control architecture—we continue to try and refine that, which is another reason for controlling our own software. What we’re trying to do is literally read the mind of the player. What is the player’s intention? When they hit those keys—what do they hear in their head that they want to come out of the speakers? And, we still have fairly primitive tools to do that with. We’re still dealing with MIDI, which is not the most sophisticated system available, but it’s all we have. And I think that what you’re going to see in the future is you’re going to see a combination of samples and synthesis working together. We now have physical modeling. That’s where they create an electronic version of the sound wave. It has a lot of advantages in terms of control architecture. But the actual sounds still don’t sound as good as samples in my opinion, and until they do I don’t think you’re going to see much change in the products that people typically use to produce their work. It’s an area where others and we are doing research, but it’s probably a few more years before you’ll see any products that we’re happy with.
Currently we offer multiple dynamics, interval sampling on some products (SILK for example), different articulations, keyswitches to control them, mod wheel control, and things like that. But analyzing what’s coming out of the keyboard and interpreting that into playing the right articulations is obviously the ultimate goal because we firmly believe that musicians need to get the tech side out of the equation and concentrate on making music. And sometimes, they spend far too much time grappling with the technology—which I think is a bad thing. And it’s up to companies like us to find ways to reduce that; certainly we’ve come a long way to achieving that objective.
ERNST NATHORST-BOOS, PROPELLERHEAD SOFTWARECA: Of course, Reason is a complete studio application. But I wonder if you have a sense of how many people primarily use it to ReWire into a host application as a sort of “outboard instrument rack”? Is this a common usage of Reason?ENB:
Yes, it is. Our user surveys have told us that the two most common types of users are those who say Reason is their main (or only) “axe,“ and those who use it with a ReWire host. It fits with our observations too. It seems like either you create your music in Reason—using our sequencer, or you use the rack, sort of as as a super plug-in providing all your keyboard sounds, loops, and the like.CA: Several companies, like Native Instruments and Arturia, are getting into hardware controllers to provide more of a “hands-on” feel with virtual instruments. And you’ve made an effort to make Reason as compatible with as many control surfaces as possible. Do you feel the inherent lack of physical control, as opposed to a traditional hardware synthesizer, is a limitation with today’s virtual instruments?ENB:
Absolutely! It depends a little bit on where in the creative flow you are, but often just grabbing a knob and twisting it is the fastest and most direct way to take control of your sound. And then a mouse doesn’t really cut it. Generally, with many software designs there is too much stuff that gets in the way of the things you want to do 90% of the times. Traditional hardware designs, like analog synthesizers, are limited but have that accessibility. As with everything else in life, it’s a trade-off.CA: It seems Reason 3.0 made a conscious effort to make the program more “performance-friendly.” Do you think a lot of your users take a laptop to a gig with Reason serving as a virtual instrument rack, or do you think most musicians aren’t quite ready yet to take a laptop on the road?ENB:
No, they’re fearless! We had a visit from the keyboard player of one of the biggest acts in the world and he uses only Reason and one other keyboard on stage. I sort of assumed he had backup systems and spares of everything, but no, one laptop was all he carried! When we went to see the gig he threw his wireless MIDI keyboard up in the air and didn’t catch it on the way down. He had to finish the gig on the keys that still worked . . . but yes, we do see more an more people just bringing a laptop and Reason. It works, Reason is so solid so as long as your computer holds up you’re fine.
CA: What do you feel are the most common misconceptions about virtual instruments, especially those in Reason?ENB:
The quality of the sound! There are so many misunderstandings about computer-generated sound. It’s hard stuff, so it’s not surprising but it’s still frustrating. For starters, there is no reason why a virtual instrument shouldn’t sound as good as a digital hardware unit. Actually, the computer version has potential to sound better in some ways. There are a lot of things that are hard to get right in digital designs, but unless you’re educated on the subject it’s really hard to know where to look for the differences in quality between various products. We do measurements, A/B tests, blind tests, etc. Sometimes units that we feel are really sub-standard get rave reviews and sometimes we or someone else gets criticized because of a misconception. I really wish someone would debunk a lot of the myths that surround digital audio in music production. It would help both users and the industry.
CA: Some people wish that Reason did audio recording, but I’ve always felt ReWire was a better approach, because it let you use whatever host you like for audio recording. Was this the main reason you developed ReWire, or were there other reasons as well?ENB:
Actually, the main reason was to get ReBirth to work with Cubase. This was back in the old days, even before Reason, remember? But we did it like we always do, we kept it open-ended and gradually opened it up in both ends to where it is now. But the main reason was the same as with everything we do—we just want to help people make more and better music. Hooking up our software synthesizers with a recording application was jut the natural way to go.CA: Thor is an extremely ambitious instrument. How long did it take to develop, and how many people were involved in creating it? In a related question, what is the process of creating a virtual instrument for Reason? Is it all done in-house, do you have outside people working on it, or what?ENB:
Mats Karlöf was the product manager. Peter Jubel did all the signal processing. The two of them basically designed it together, with input from a lot of other people. Then there was graphic design, developers who worked on the GUI and integration into Reason, sound developers (headed up by Kristoffer Wallman) and so forth. I think it ran over the course of a year or so. Normally we do all the design and development work in-house. Patches and sounds are mainly done by external people. The process of making something like Thor is long and convoluted. It passes through a number of stages of designs and prototypes and ends with user tests and tweaks. It’s really hard to summarize, actually it would be easy to fill up an article on that subject only.CA: You have now created two big standards for the industry, ReWire and the REX file format. What other standards would you like to see created that involve virtual instruments or recording?ENB:
Wow, I don’t know . . . don’t we have enough standards as it is? Wouldn’t fewer standards be a better way to go? But seriously, better integration between hardware and software would be a good thing.CA: You’ve taken an interesting approach to copy protection, where you reward legitimate users with lots of free goodies and incentives instead of concentrating on trying to penalize those who steal software. Looking back, do you think this has been a good decision?ENB:
Actually all our main products have copy protection and always have had. Really strong ones too. With ReBirth you had to put the CD in the drive every time you ran the application. With Reason, it’s just that the protection is based on the fact that no one could download 600MB, which was true in 1999 when we created it. But regardless of that, protection is like the lock on the door of your restaurant. It may keep burglars out but it doesn’t bring any customers in. We want the relation to our users to begin when they buy the box, not end there. So we try to come up with little things that make it worthwhile to be part of what’s going on in Propellerheadland. It’s nothing spectacular, it just seems to make sense.CA: The Reason Instruments series is outstanding. Can you reveal any special techniques you used in the sampling process that explain for why the instruments are so playable?ENB:
Musicianship combined with meticulous engineering. Kristoffer Wallman works with a team of excellent people and guides them towards those results. But I’m glad you say “playable” because again that’s exactly what it’s about for us. Not doing the most advanced or biggest or cleanest instruments, or whatever. Just the most playable, and the ones that work in real life productions.CA: What do you see as the biggest weakness in the current generation of virtual instruments?ENB:
The integration with the host. And then I refer to plug-ins of course, not Reason. It’s gone little bit haywire I think, where some instruments are more like applications themselves. If your main goal is to write and produce a song, having to shift between so many “worlds,” that are not integrated, not share user interface conventions, don’t allow you to cross-browse through patches etc, it slows you down, it deters you from the original goal. Music making shouldn’t have to be like that.
PETER GORGES, AIRCA: Digidesign is known for, among other things, creating hardware interfaces for their software. How important is hardware control for virtual instruments, and do you anticipate more hardware solutions appearing along the lines of Native Instruments’ Kore?PG:
Hardware control is very important for using instruments in composing/arranging, not necessarily for programming sounds. I think though there is less and less need—or let’s call it “willingness to pay”—for customized remote hardwares for virtual instruments. For now, remote surfaces and remote keyboards do too good a job. Then, hardware has the unpleasant habit of not magically changing the user interface when you load up a new instrument, so it’s deemed to be very limited across the range of virtual instruments pretty much everybody has these days. Besides, there’s a solution on the horizon that can combine hardware touch and feel with unlimited adaptability to GUIs: Multitouch surfaces. CA: Many analog purists feel that virtual instruments don’t deliver a true analog sound. Is that still true, or a holdover from the early days of virtual instruments, when the technology was less sophisticated?PG:
I think one reason why many purists feel that virtual instruments don’t deliver a true analog sound is because many of them actually don’t, although the manufacturer’s marketing, reviewers, and public forums state the opposite. I can understand that purists—or maybe just professional musicians who used the real thing in earlier times—after a few disappointing experiences lose faith in virtual instruments as a replacement for analog synths. I am convinced that we have the technology to create a 100% realistic emulation of, say, a Moog 55, but there are remaining practical challenges.
First, those original synths required a pretty good synth designer and selected parts in the first place. All those electronic parts, when connected, interact in so many ways that it’s sure not as easy as hooking up an oscilloscope to the original and analyzing what happens. It requires an extremely good ear and tremendous synthesizer expertise to even know what you’re supposed to emulate, and it’s infinitely complex. So even assuming you got that right (which in reality is very rare), there’s the challenge of computing power. You want to be sample-accurate at least, as an analog synth doesn’t know any buffer sizes. Most commercial products are not sample-accurate, which in essence means the timing resolution of (for example) the envelopes or modulation options is finite, and you can hear that. Many avoid audio rate modulation too, as it eats up a tremendous amount of CPU. Then how about the artifacts created by aged key contacts, temperature drift, interaction of two mod sources fed into one mod destination—all that clipping, voltage/signal compression, beating, all those tiny inaccuracies have to be accurately modeled.
All commercial products have to compromise on these things in a big way, and a purist recognizes that. And even if you got that right, there’s psychology: People who know they’re not sitting in front of the “real thing” don’t want to believe the emulation is not accurate, and sitting in front of a big modular system speaks to multiple senses and has nothing to do with fumbling on tiny pixeled knobs on a computer screen. I bought a Moog 55 replica last year and love it more every day. Sure, it’s 170 pounds for one monophonic voice, but that voice is worth it.
That all said, I still think all those virtual synth emulations have their right to exist—the huge majority of the users of those virtual instruments love them and would never bother or be able to afford buying the real thing. CA: Can you describe the process of designing a virtual instrument? Is it a team effort, or mostly the result of one person? About how many ma n-hours does it take to develop a virtual instrument? How much effort goes into creating a graphic interface?PG:
I think this differs greatly from company to company. I know companies where one single guy makes all the difference—or even all the products, and I know others who have no one particularly over-talented, but a great team. It also differs from product type to product type. I’d say a sampler is a typical team product because it’s mostly about efficiency, feature set, compatibility and stability. That said, a novel breed of virtual instrument requires one or two people with a lot of background, golden ears and a good idea of what customers will appreciate. The bread-and-butter coding work could even be contracted out—there are so many people out there with a decent knowledge of DSP programming, C++, some GUI framework and plug-in formats.
In our case, the development of a virtual instrument takes somewhere between six months and one year, with a team of about 12 people involved—but they’re usually also something that distracts them going on at the same time, such as Apple feeling like releasing another OS that breaks your plug-ins, or a new Pro Tools release. For a specific example, the five new instruments and 20 effects in Pro Tools 8 were done in less than five months, but of course we could also re-use a lot of existing engine technology. There’s a bit of Structure in the Mini Grand, and a bit of Transfuser in Boom.
Being part of Digidesign, quite a substantial part of our time goes into testing. The graphic user interface usually gets developed along with everything else and rarely gets finished before everything else. Of course we usually draft everything as part of the specification, but in every case when you look at the first prototype, things that made sense on paper or in Photoshop don’t work that well, and you have to change on the fly. I’d say it typically takes three months of one talented graphic designer and a good product designer to develop the GUI. The actual implementation work is not quite that much if you use a good GUI framework.
CA: Are you looking forward to the increased RAM that 64-bit operating systems provide to a system? Does that have uses for virtual instruments other than samplers?PG:
Yes, definitely—it has a major effect on your overall workflow, as every project (at least in my case) uses several instruments at a time. Pretty much every instrument except for a pure virtual analog synthesizer requires RAM of some sort, and that adds up quickly. All sampled real-world sounds rely on disk-streaming—drums, pianos, not to mention big orchestra setups, but also sample-based techno synthesizers—everything. Once RAM isn’t an issue anymore, we’ll probably see more instruments that liberally use huge samples for new synthesis technologies, and companies can stop wasting their precious time on looping and compressing samples. Whether it’s 64-bit systems or solid state drives becoming cheaper and more popular—disk streaming is going to go away real soon, and that is a great thing. CA: What is the biggest weakness in the current generation of virtual instruments?PG:
A lack of innovation to the degree of annoyance, and it’s so bad that it creates “marketing by desperation” as I call it, where companies seem to lose a healthy sense of embarrassment in their advertising and product strategy. If aliens would read press releases for another me-too virtual grand piano or analog synth emulation, they’d be led to believe we humans have invented the self-powering light bulb. And that in spite of most instruments you see these days being nothing but a regurgitation of other existing ones. And I don’t say “all” merely for the reason I may have overlooked one, but I wouldn’t know any single instrument in the last two to three years that does something I didn’t have available five years ago. I want to be clear: Regurgitation and iteration is fine and in the best case it yields improvement in the bread and butter domain, but that’s all there is right now.
Look at what gets awards these days, and you know those poor juries must be desperate. Of course, every company claims that their newest virtual instrument is the best, total unique, a revolution and creates sounds unheard before—I’ve seen that in virtual grand piano marketing blah. But the only real reason they say that I guess is because “XYZ is a regurgitation of A, B and C” or “it’s not even better than A, B and C but we had a gap in our catalog” or “We could have done this fantastic DFG but let’s face it, you herd of sheep wouldn’t buy it” wouldn’t sound that appealing.
What I find dangerous about this is that it has a dulling effect on customers—over the last three or four years I’ve experienced a decreasing interest in innovative concepts. That’s a catch-22—if your finance guy tells you the best-selling instruments for years and years have been drum modules—with the main development over the years being bigger libraries and lower prices—why bother developing a neuronal atmosphere resynthesis system with GPS interference modeling? And yet there are still unresolved areas that virtual instruments would be great at, and would be appreciated and purchased by customers—it’s just too easy to sample another set of drums. CA: There seems to be two types of philosophies about virtual instruments: Emulating vintage synthesizers and drum machines, or creating instruments that are possible only in the virtual world. Your new instruments for Pro Tools seem to combine those two philosophies. Was this deliberate? Can you comment more on your philosophy of creating virtual instruments?PG:
Well, firstly there’s my personal philosophy of creating virtual instruments, and then there’s my professional philosophy of the guy being in charge for Digidesign’s virtual instruments.
I personally would spend all my time on inventing stuff that only a fraction of our user base would probably appreciate. Under my Digi hat, my main interest is to listen and cater to the needs of Pro Tools customers. That’s why we did Structure, because everyone from hobby guitarist to Skywalker pro production facility needs a sampler. That product didn’t overstrain my creativity, but it was interesting to find out how much more efficient, easy to use or powerful we can make a product that you can buy from ten other companies. Transfuser was the opposite—it started out as a paper I wrote, and the entire team was so enthusiastic about that instrument that it ended up as a creative effort by everyone. And although on the surface it looks like we just regurgitated other loop-based software, if you dig a bit deeper Transfuser has a lot of great stuff you don’t find anywhere else—like the M.A.R.I.O. algorithmic feature.
The philosophy behind the Pro Tools 8 instruments and plug-ins was pretty simple: There are always instruments that people keep asking for and you’d love to do them, but you know they wouldn’t be a huge commercial success and the economics wouldn’t justify throwing that team on it for months. So when we were planning PT8 and the idea of bundled instruments came up, it was clear it weren’t going to be just “lite” versions of our for-sale instruments, but instruments that complement those, are fun to make and play with. I think people appreciate that we had big fun giving those instruments a bit of an edge. Vacuum looks and sounds like it was built from a few rusty old parts in a Russian army shed, Boom is an almost ironic homage to vintage drum machines, and the DB-33 has this amazing new rotating speaker emulation technology that everybody overlooks.
But I can’t say we deliberately combined emulated instruments and new virtual ones. We just wanted to make sure that with the given technology and resources we create exactly the set of instruments that’s most useful and fun to people, and complements our for-sale products.
NICK BATZDORF, VIRTUAL INSTRUMENTS MAGAZINECA: Were you taken by surprise when virtual instruments first appeared, or did you “see it coming?”NB:
Much as I’d like to pose as a visionary, the truth is that their evolution was too gradual for it to have been a surprise when they finally “arrived”—that is, when computers became powerful enough to present a serious alternative to hardware synths and samplers.
If you think about the history, somewhat cheesy soundcard-level synths have been around practically since the beginning of the digital age. Therefore the idea of synths’ interfaces being on a computer screen already wasn’t novel, never mind that their engines ran on their own chips. Creative Labs’ Soundblaster card for PCs is an example.
Even before then, Yamaha had an 8-bit music computer in the early ’80s called the CX5m, with multitimbral 4-operator FM synthesis (based around the same chip later used in several of their instruments, such as the dust-laden FB-01 now resting somewhere in my garage). And by the later ’80s, the Mac’s built-in lo-fi SoundManager software-only sampled instruments introduced the concept of virtual instruments that didn’t need extra hardware—even if they didn’t go as far as proving that concept.
There were many other hints of things to come. Jumping ahead a couple of years, Digidesign’s SampleCell was a serious, professional sampler-on-a-card that really bridged the gap between software and hardware. (Much later Digidesign introduced a short-lived software version, Soft SampleCell.) SampleCell used the host computer as a front end, but it had its own memory and processing onboard.
By the mid-’90s, music companies were licensing their chips to computer card manufacturers. An example of that was the Morningstar MacWavemaker, a version of Kurzweil’s synths that sounded very credible; it used the computer as the front end. And the most likely reason Creative Labs bought E-Mu, a pioneer sampler company, was to put some of its technology in their mass-market products like SoundBlaster.
Yet another example of the computer being a front end for hardware is the very high-end Synclavier “workstation,” which eventually ended up using a Mac as its front end control interface. That leads to another important thing: the Synclavier was an early example of a “workstation”—an all-in-one self-contained music system in one box. Yes, even then the idea of a do-it-all musical tool was appealing, and to this day a lot of hardware instruments include workstation features.
Now, I think most advanced users understood all along that every piece of digital hardware is simply a dedicated computer. And we all knew computers were getting exponentially more powerful with each generation, because we were buying them every couple of years! So it was just a matter of time before a single computer could do it all . . . although that’s turned out to be a moving target, since even today the music software we use can bring a single computer to its knees and a lot of musicians use multiple computers in their rigs.
Anyway, it was hardly a shock when, I think a little before the turn of the century, virtual instruments and software samplers started getting pretty serious. At first the latency made them hard to play in real time, but it didn’t take long for computers to get fast enough to reduce the buffer sizes and take care of that problem.
Nonetheless it did take a while for them to become totally serious. You may remember that V.I.s originally earned a rather dubious reputation, in fact some of the pioneer companies in the late ’90s ended up with arrows in their backs. There were undoubtedly business reasons for their demise, but also these systems just weren’t stable enough for studio use, let alone live performance. This wasn’t so much because the hardware was being brought to its knees—which it was—but rather because of the way these instruments interacted with other software running on the same machine. Oy!
That’s all water under the bridge now, and musicians all over the world now use software instruments for high-pressure projects without a second thought, both in the studio and on stage.
Now, what did take me and a lot of other musicians by surprise is how streaming technology turned sampling into a whole new musical medium. Nemesys GigaSampler, the first streaming sampler, read samples off a hard drive rather than loading them into RAM. That allowed samples of unlimited length, and to whet the appetite Giga came with just one single huge (by the standards of the day) instrument: GigaPiano.
Cool. But the latency made it little more than a novelty . . . at first.
Then they sorted out the latency, and a whole cottage industry of sample developers and specialized Windows computer builders appeared. For studio use, hardware samplers started looking pretty limited. Freed from the limitation of holding the entire programs in RAM, Giga’s unlimited recording time allowed instruments to be sampled in great detail. That meant you could have dozens of articulations for each instrument, and the whole field of MIDI programming was born. It was mostly an orchestral technique—dividing MIDI notes between tracks assigned to, say, samples of different string performance techniques—but that expanded to include all kinds of instruments.
Meanwhile most of the interesting synthesizers were and are being developed in software rather than hardware. The one I personally find the most fun is Native Instruments’ FM7 (now FM8). It’s by no means the most interesting synth on the market—I don’t know if it’s even possible to pick a single one that is—but I get excited because it can read Yamaha DX7 voices directly; my first synth was a Yamaha DX7 back in 1985.
CA: Do you feel that hardware synths will eventually be replaced by plug-ins running on a laptop or a hardware host like Receptor?NB:
I think by now the dust has settled, and the way it is today is pretty much the way things are. Racked or well-protected standard computers, laptops, and devices like the Receptor are all being used for live performances alongside hardware instruments.
Each of those has its advantages. Racked or well-protected desktop machines are very durable, and they can hold extra hard drives internally—both for backup and for holding large sample libraries. Laptops are smaller and more convenient, but they’re not as durable as regular machines and lack the internal drive storage space. The Receptor family is durable, very quick to start in the event of a crash, and you can load programs without a monitor if you want.
If I were a touring musician, I’d want a redundant computer system fired up and ready to go in case something went wrong. But then I’d want an extra one of each hardware synth I was bringing too, because things tend to get thrown around. In the studio, most of musicians I know (who tend to be composers) are all using more software.CA: What’s the biggest advantage hardware synths have over virtual instruments?NB:
The sound of the specific instrument. Case in point: I’m still madly in love with the Yamaha VL1 Acoustic Modeling synth, which came out in 1994. One of the instruments I play is the Akai EWI wind controller, and until recently the VL1 was the only instrument I used with it. Now there’s a softsynth, Wallander WIVI, that I also use with the EWI. More generically, hardware synths are self-contained systems and everything is more immediate. Turn the thing on and play.CA: What’s the biggest advantage virtual instruments have over hardware?NB:
You can run lots and lots of them, the computer screen tends to give them a nicer interface, and you can combine many of them inside one computer and recall huge set-ups with a single command. Ultimate Support doesn’t even make the A-frame keyboard stands we all used in the ’80s and ’90s to accomplish the same thing anymore!
The other advantage is that V.I.s are far less expensive, as they run on general-purpose computers; that itself creates an economy of scale. I mean, every Mac comes with GarageBand pre-installed, and that has a whole bunch of instruments and effects that aren’t at all shabby. And all the sequencing programs come with a healthy selection of built-in instruments.
Finally, it used to require a big company to develop a synth, with all the hardware and custom chips. Now there are people in their bedrooms developing software instruments.CA: What obstacles and weaknesses need to be overcome with virtual instruments?NB:
I think soft synths have pretty much been figured out. Software sampling doesn’t have obstacles or weaknesses, but we’re just now approaching the point where the software can make use of all the available horsepower and memory in today’s top-end computers. Memory comes down to having 64-bit memory access (already there with some samplers, such as VSL’s Vienna Instruments 3 on Windows, soon to follow when Mac OS X 10.6 makes that possible). Meanwhile, there are ways of accessing lots of RAM on Macs by running multiple stand-alone instances of the sample players. Both 64-bit memory access and multithreading are well underway.
I’m not sure the single machine solution will ever arrive, though, because developers are always pushing the envelope. So musicians running huge projects will probably continue to employ slave computers that do nothing but play sounds—in other words they behave just like external MIDI modules.
With that in mind, the next great development is arriving quickly: audio and MIDI running over Ethernet, so you don’t need audio and MIDI interfaces on your slaves. VSL’s Vienna Ensemble 3 does that very well for their libraries, Audio Impressions Audioport runs audio between Windows and Macs, MusicLab Midi Over Lan runs MIDI between Macs and/or Windows machines . . . we’re almost there with both audio and MIDI running freely between Macs and/or Windows for every virtual instrument, regardless of developer.CA: How do you feel about emulation of vintage instruments as opposed to creating new types of instruments (e.g., Cakewalk Rapture)?NB:
It’s all good as far as I’m concerned. Bear in mind that since my first synth was a DX7, it’s not terribly important to me whether a recreation of an analog synth that came before it is exact. What’s important to me is that it sound really good; other people who started earlier are wont to disagree vehemently.
On a personal note, I find Native Instruments’ FM7 and FM8, which start by emulating the DX7 and then take off from there, just too cool. There are three DX7 sounds I programmed back in the ’80s that I still use, and being able to play them in software is . . . well, there’s something reassuring about having access to the same synth I relied on for everything 25 years ago.CA: Do you feel hardware controllers for synths are essential, unnecessary, or somewhere in between? Does NI’s Kore system address that need well? NB:
They can be good for performing sounds in real time, sure. I personally don’t feel that something’s missing in the art of synthesis without one, but a lot of synthesists really value the tactile response.
What I really like to use is a breath controller, because it adds a human, expressive feel to parts when you play them. Disclaimer: I’m involved in developing a higher-end breath controller as an alternative to the only one on the market now, the Yamaha BC3. But the reason we’re developing it is that it’s something we want to use.CA: What are your favorite virtual instruments, and why? NB:
Because of my personal musical interests, my favorite instruments are all sample libraries. If I had to pick one library for the desert island, it would have to be one of the major orchestral ones on the market, each of which has its relative advantages and disadvantages. As to synthesizers, the sounds that inspire me the most tend to be instruments that could exist in the acoustic realm but don’t.CA: Do you have an idea of what the next step is beyond virtual instruments? NB:
Whatever it is, I expect the next step to be within the field of virtual instruments, not beyond it.
If computers continue to get way more powerful, one could imagine that convolution processing would take on an increasing role. Right now we’re using a single sample of whatever is being convolved, but at some point it should become possible to go between multiple impulses in real time. VSL is already doing that with their MIR mixing/reverb processor, but I could see that being applied to real-time synthesis as well. And for that matter, to sampling.
Applied Acoustics Systemswww.applied-acoustics.com
Future Audio Workshop www.futureaudioworkshop.com
IK Multimedia www.ikmultimedia.com
Native Instruments www.native-instruments.com
Propellerhead Software www.propellerheads.se
Sonic Core www.soniccore.com
TC Electronic www.tcelectronic.com
Use Audio www.use-audio.com
Way Out Ware www.wayoutware.com