DT50 guitar amplifiers produce four amp voicings : classic American cleans, chimey and crunchy British tones, and modern high-gain distortion. Each voicing comprises a preamp and tone stack fueled by brand-new Line 6 HD modeling technology, and automatically paired with dynamic analog circuitry including tube configuration and negative feedback topology courtesy of Reinhold Bogner''s versatile 50-watt EL34 power section.
To conjure a classic American clean amp voicing, for example, HD amp modeling technology configures the amp''s preamp and tone stack to produce a gleaming, classic clean tone. This tone is supported by the automatic reconfiguration of the amp''s analog components, which deliver a high amount of negative feedback.
Players can also create their own signature tones with front panel access to the tube amp''s analog Class-A/B and pentode/triode switches. Favorite Class-A amp tones can be run in Class-A/B, and so on.
The amps feature a 2-channel design. Each channel can be set with a completely different reconfiguration: Channel A can be Voicing I/Class A/Pentode; Channel B can be Voicing IV/Class-A/B/Triode.
DT50 guitar amplifiers integrate with new POD® HD multi-effect pedals.
All DT50 amplifiers include a high-quality spring reverb model on each channel a serial FX loop with level boost/cut and a push/pull volume pot that engages a Low Volume mode. An output transformer-tapped XLR connection provides a cabinet-simulated direct output, providing a line-level output that dynamically interacts with the DT50 speaker and tubes. Channel switching can be achieved via standard 1/4-inch footswitch, MIDI or L6 LINK connections.
DT50 112 ( $1,849.99) features a 12-inch custom Celestion G12H90 speaker; DT50 212 ($2,149.99) features 12-inch Celestion Vintage 30 and custom Celestion G12H90 speakers; and DT50 412 ($1,149.99) cab is cross-loaded with two 12-inch custom Celestion G12H90s and two 12-inch Celestion Vintage 30s.
DT50 amplifiers will ship late October 2010.